Policy Integration API Guide

※ Last updated: 2026-03-24

Document Information

item	Content
Document Version	`6.2026.0324.01`
Writing	SOFTCAMP
Content-Type	`application/json`

Environment Setup (Required)

danger

Prior consultation required for IP allowance
This API isIP-based access controlis applied.
To use the API, the customer company'sAccess source IP addressYou need to deliver it to SOFTCAMP in advance.

Customer Preparation Requirements

Please provide the following information about the server/system that will call the API.

Delivery Information

Access source IP address (e.g:192.168.1.50, 10.10.12.100)
Purpose (e.g., security portal server, batch job server)

How to Set Up SOFTCAMP Engineer

SHIELDEX server'sWebConsoleApi.propertiesRegister allowed IPs in the file.

Configuration File Location

{SHIELDEX 설치 경로}/config/WebConsoleApi.properties

IP Allowlist Settings

Setting Key	Explanation	example
`security.ip.allowed`	No-token call allowed IP whitelist (comma-separated)	`10.10.12.43,10.10.12.44`

warning

Important
Allow list(security.ip.allowedif a request is made from an IP not in __PH_0__Blockand will respond as follows.

{
  "timestamp": "2026-02-11T06:12:33.739+0000",
  "status": 403,
  "error": "Forbidden",
  "message": "IP_ACCESS_DENIED",
  "path": "/WebConsoleApi/policy/targets"
}

status: 403
error: Forbidden
message: IP_ACCESS_DENIED

After changing the settings, you must alwaysRestarting SHIELDEX WebConsole ServiceThis is needed.

Base URL

http://{serverIp}:{serverPort}/WebConsoleApi

All API paths are called by appending them to the above Base URL.

example— Server IP is10.10.12.100, port is9000in case:

http://10.10.12.100:9000/WebConsoleApi/policy/targets/merged/preview/user001

API Resource Map

This is the list of APIs provided in this document.

Base URL: http://{serverIp}:{serverPort}/WebConsoleApi

/policy/targets
├── GET    /policy/targets/merged/preview/{targetId}   # Policy Integration Preview
├── POST   /policy/targets                             # Policy Partial Update
└── DELETE /policy/targets                             # Policy Selective Deletion

Method	URI	Explanation
GET	`/policy/targets/merged/preview/{targetId}`	Merged overall view of corporate + individual policies
POST	`/policy/targets`	Add/modify only the requested policy (maintain existing)
DELETE	`/policy/targets`	Release only the requested policy (restore to the parent policy)

1. Common Rules

1.1 Response Structure

All API responses follow the format below.

{
  "code": 0,
  "codeMessage": "SUCCESS",
  "data": { }
}

field	type	Explanation
`code`	`Integer`	Processing Result Code
`codeMessage`	`String`	Processing Result Message
`data`	`Object`	Response Data (returned on GET requests, may be omitted on POST/DELETE)

1.2 Response Code Definition

code	codeMessage	Explanation	HTTP Status
`0`	`SUCCESS`	Normal processing completed	`200`
`1`	`FAIL`	Unable to process	`200`
`4000`	`INVALID_REQUEST`	Invalid request (missing required values, validation violations, body format/Content-Type errors, etc.)	`400`
`4404`	`VALUE_NOT_FOUND`	Non-existent target (targetId, policyId, etc.)	`404`
`5000`	`INTERNAL_ERROR`	Internal Server Error	`500`

1.3 Timestamp Rules

danger

Unit Warning: epoch milliseconds (13 digits)
All timestamp fields areepoch millisecondsIt is in units of (1/1000 seconds).
Unix epoch seconds (10 digits) is**No.**Please make sure to check the number of digits.

epoch seconds     : 1761523200        (10 digits) ← This is not the unit
epoch milliseconds: 1761523200000     (13 digits) ← The unit used in this API

warning

Time Zone Warning: Must be based on KST (Asia/Seoul)
When converting date/time to epoch milliseconds, it is essential to**KST (UTC+9, Asia/Seoul)**It must be converted based on the criteria.

When converted to UTC, a difference of 9 hours occurs, resulting in an application that differs from the intended duration.

"2026-03-21 00:00:00" KST 기준 → 1774278000000  ← Correct value  
"2026-03-21 00:00:00" UTC 기준 → 1774310400000  ← 9 hours delayed (applied as KST 09:00)

Java: sdf.setTimeZone(TimeZone.getTimeZone("Asia/Seoul"))use
JavaScript: new Date('2026-03-21T00:00:00+09:00')use
TimeZone.getTimeZone("UTC")Prohibited

Fields related to Timestamp

field	type	Direction	Explanation
`startTimestamp`	`Long` (int64)	Input/Output	Policy application start time (epoch ms,KST standard). If omitted, applied immediately
`endTimestamp`	`Long` (int64)	Input/Output	Policy application end time (epoch ms,KST standard). If omitted, indefinitely
`startTimestampText`	`String`	Output-only	KST conversion date (e.g:`2025-12-04 09:52:33`)
`endTimestampText`	`String`	Output-only	KST conversion date. If indefinite,`null`

Conversion Code Example

// JavaScript (KST 기준)
const start = Date.now();                                             // 현재 시각 (즉시 적용)
const end   = new Date('2026-03-01T00:00:00+09:00').getTime();        // KST 2026-03-01 자정

// Java 1.7 (JDK 1.7) - SimpleDateFormat 사용
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.TimeZone;

public class PolicyTimestamp {
    public static void main(String[] args) throws Exception {
        // KST 기준 날짜 문자열 파싱
        SimpleDateFormat sdf = new SimpleDateFormat("yyyy-MM-dd HH:mm:ss");
        sdf.setTimeZone(TimeZone.getTimeZone("Asia/Seoul"));
        
        // 현재 시각 (즉시 적용)
        long start = System.currentTimeMillis();
        
        // KST 기준 특정 날짜를 epoch milliseconds 로 변환
        // 예: KST 2026-03-21 00:00:00 ~ 2026-03-21 23:59:59 (하루)
        long dayStart = sdf.parse("2026-03-21 00:00:00").getTime();
        long dayEnd   = sdf.parse("2026-03-21 23:59:59").getTime();
        
        System.out.println("startTimestamp: " + dayStart); // 1774278000000
        System.out.println("endTimestamp: " + dayEnd);     // 1774364399000
    }
}

// Java 1.8 이상 (JDK 1.8+) - LocalDateTime + ZoneId 사용
import java.time.LocalDateTime;
import java.time.ZoneId;

public class PolicyTimestamp {
    public static void main(String[] args) {
        ZoneId kst = ZoneId.of("Asia/Seoul");
        
        // 현재 시각 (즉시 적용)
        long start = System.currentTimeMillis();
        
        // KST 기준 특정 날짜를 epoch milliseconds 로 변환
        // 예: KST 2026-03-21 00:00:00 ~ 2026-03-21 23:59:59 (하루)
        long dayStart = LocalDateTime.of(2026, 3, 21, 0, 0, 0)
                .atZone(kst).toInstant().toEpochMilli();
        long dayEnd   = LocalDateTime.of(2026, 3, 21, 23, 59, 59)
                .atZone(kst).toInstant().toEpochMilli();
        
        System.out.println("startTimestamp: " + dayStart); // 1774278000000
        System.out.println("endTimestamp: " + dayEnd);     // 1774364399000
    }
}

info

API version independence
The API is not dependent on a specific Java version.

The required value is **epoch milliseconds (13-digit integer) based on KST**.

Java 1.7 (JDK 1.7): SimpleDateFormat, Date, CalendarGenerate epoch milliseconds using __PH_0__
Java 1.8+ (JDK 1.8+): InstantEasy conversion with classes

The above example is for reference, and it also works in the Java 1.7 environment.System.currentTimeMillis()You can also generate and use the same 13-digit millisecond value in various ways.

Reference: startTimestampText, endTimestampTextis a read-only field and cannot be used for input.

Validity Rules

When both are specifiedendTimestampastartTimestampmust be larger (in case of violation400 INVALID_REQUEST)
If both are omitted, it will take effect immediately and indefinitely.

1.4 Policy Priorities

The policy value is determined by the priority below. If a higher one exists, it overrides the lower one.

User Individual Policy  ← Highest Priority
  ↓
Group Policy
  ↓
Enterprise Default Policy  ← Lowest Priority

1.5 Override Information

Fields included in each policy item of the query response. You can find out where the policy is set.

field	type	Explanation
`overridden`	`Boolean`	When individual policies are applied`true`, if the default is set to "transmission"`false`
`overriddenBy`	`String`	Policy Source:`"user"` / `"group"` / `"default"`
`overriddenById`	`String`	User ID or Group ID that set the policy (`default`If so`null`)

1.6 Request Body Format (Content-Type) Rules

warning

Important
POST /policy/targets, DELETE /policy/targetsmust be **JSON body +Content-Type: application/json**must be called.
text/plainIf you call in a format other than JSON, the request will be denied.

Recommended Header:Content-Type: application/json
Non-recommended example:Content-Type: text/plain;charset=UTF-8(Request Denied)

Failure Response Example (Body Format Error)

{
  "code": 4000,
  "codeMessage": "INVALID_REQUEST"
}

2. Policy Integration Inquiry

`GET` /policy/targets/merged/preview/{targetId}

Enterprise policies and target individual policiesMergeTherefore, it returns the overall policy results that will be actually applied to the user.

Full URL Example

GET http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets/merged/preview/user001

Path Parameters

Parameter	type	Essential	Explanation
`targetId`	`String`	O	Target User ID

Response Field

field	type	Explanation
`data.targetId`	`String`	Target ID
`data.templates`	`Array`	Policy List by Category
`data.templates[].categoryId`	`Integer`	Category ID
`data.templates[].categoryName`	`String`	Category name (e.g., Common, Exception, MS Office ...)
`data.templates[].policyList`	`Array`	List of policy items for the corresponding category

Policy Item (policyList) Field

field	type	Explanation
`policyId`	`String`	Policy Unique Identifier (e.g:`SD_DOC_OP_MODE`)
`policyName`	`String`	Policy Display Name
`policyValue`	`String`or`Integer`	Current applied policy value
`policyDesc`	`String`	Policy Detailed Description
`uiTypeCode`	`Integer`	UI Type —`1`: Text input,`2`: Selectable
`uiOptions`	`Array`	Selectable Option List (`uiTypeCode=2`only exists when)
`overridden`	`Boolean`	Application of Individual Policies
`overriddenBy`	`String`	Policy Source (`user` / `group` / `default`)
`overriddenById`	`String`	Subject ID that set the policy
`startTimestamp`	`Long`	Start time of application (epoch ms)
`endTimestamp`	`Long`	End of application time (epoch ms)

curl example

curl -X GET   "http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets/merged/preview/user001"   -H "Content-Type: application/json"

Response Example — `200 OK`

{
  "code": 0,
  "codeMessage": "SUCCESS",
  "data": {
    "targetId": "user001",
    "templates": [
      {
        "categoryId": 1,
        "categoryName": "공통",
        "policyList": [
          {
            "uiOrder": 1,
            "uiTypeCode": 2,
            "uiTypeDesc": "select",
            "policyId": "SD_DOC_OP_MODE",
            "policyName": "무해화 사용 설정",
            "policyDesc": "문서 무해화 기능의 사용 여부를 설정합니다.\nON: 문서 무해화 기능을 사용합니다.\nOFF: 문서 무해화 기능을 사용하지 않습니다.\n'기록 모드' 설정 시 문서 무해화를 수행하지만, 반입 처리되며, 상세 로그가 기록됩니다.",
            "uiOptions": [
              { "value": 0, "label": "사용 안함" },
              { "value": 1, "label": "사용 함" },
              { "value": 2, "label": "기록 모드" }
            ],
            "policyValue": 2,
            "overridden": true,
            "overriddenBy": "user",
            "overriddenById": "user001",
            "startTimestamp": 1762300800000,
            "endTimestamp": 1862300801000,
            "startTimestampText": "2025-11-05 09:00:00",
            "endTimestampText": "2029-01-15 09:00:01"
          },
          {
            "uiOrder": 11,
            "uiTypeCode": 2,
            "uiTypeDesc": "select",
            "policyId": "SD_NOSUP_EXT_MODE",
            "policyName": "미지원 확장자 차단 설정",
            "policyDesc": "서비스에서 지원하지 않는 확장자 및 '무해화 허용 확장자 필터'에 포함되지 않은 확장자에 대한 처리 방식을 설정합니다.\n'기록 모드' 설정 시 미지원 확장자로 탐지되더라도 반입 처리되며, 상세 로그가 기록됩니다.",
            "uiOptions": [
              { "value": 0, "label": "차단" },
              { "value": 1, "label": "원본 반입" },
              { "value": 2, "label": "기록 모드" }
            ],
            "policyValue": 2,
            "overridden": true,
            "overriddenBy": "user",
            "overriddenById": "user001"
          },
          {
            "uiOrder": 12,
            "uiTypeCode": 2,
            "uiTypeDesc": "select",
            "policyId": "SD_EXT_MODE",
            "policyName": "확장자 위변조 차단 설정",
            "policyDesc": "파일 확장자와 실제 파일 형식이 일치하지 않는 경우, 위·변조로 간주하여 처리 방식을 설정합니다.\n'기록 모드' 설정 시 위·변조로 탐지되더라도 반입 처리되며, 상세 로그가 기록됩니다.",
            "uiOptions": [
              { "value": 0, "label": "차단" },
              { "value": 1, "label": "원본 반입" },
              { "value": 2, "label": "기록 모드" }
            ],
            "policyValue": 2,
            "overridden": true,
            "overriddenBy": "user",
            "overriddenById": "user001"
          }
        ]
      },
      {
        "categoryId": 2,
        "categoryName": "예외",
        "policyList": [
          {
            "uiOrder": 6,
            "uiTypeCode": 2,
            "uiTypeDesc": "select",
            "policyId": "SD_EXCEPTION_BYPASS",
            "policyName": "무해화 오류 발생 시 원본 반입 설정",
            "policyDesc": "무해화 엔진 오류, 처리 불가, 시스템 예외 등으로 인해 무해화가 정상적으로 완료되지 못한 경우의 처리 방식을 설정합니다.\n'기록 모드' 설정 시 무해화 오류가 발생하더라도 반입 처리되며, 상세 로그가 기록됩니다.",
            "uiOptions": [
              { "value": 1, "label": "원본 반입" },
              { "value": 0, "label": "차단" },
              { "value": 2, "label": "기록 모드" }
            ],
            "policyValue": 2,
            "overridden": true,
            "overriddenBy": "user",
            "overriddenById": "user001"
          },
          {
            "uiOrder": 2,
            "uiTypeCode": 1,
            "uiTypeDesc": "text",
            "policyId": "CQMS_NOSUP_EXCEPT_EXT",
            "policyName": "미지원 확장자 차단 예외 설정",
            "policyDesc": "미지원 확장자는 '공통' 탭의 '미지원 확장자 차단 설정' 값에 의해 처리되지만,\n이 항목에서 예외로 지정된 확장자는 원본 반입을 허용합니다.\n입력 예시) log;tmp;",
            "placeholder": "미지원 확장자 차단에서 예외될 확장자를 설정합니다.",
            "policyValue": "log;tmp;dat;",
            "overridden": true,
            "overriddenBy": "user",
            "overriddenById": "user001"
          },
          {
            "uiOrder": 3,
            "uiTypeCode": 1,
            "uiTypeDesc": "text",
            "policyId": "SD_EXCEPT_EXT",
            "policyName": "확장자 위변조 차단 예외 설정",
            "policyDesc": "확장자 위변조 파일은 '공통' 탭의 '확장자 위변조 차단 설정' 값에 의해 처리됩니다.\n이 항목에서 예외로 지정된 파일 확장자는 원본 반입을 허용합니다.\n입력 예시) docx;png;pptx;",
            "placeholder": "확장자 차단이 된 경우 예외 처리하여 반입할 수 있습니다.",
            "policyValue": "docx;xlsx;png;",
            "overridden": true,
            "overriddenBy": "user",
            "overriddenById": "user001"
          }
        ]
      }
    ]
  }
}

3. Policy Registration/Modification (Partial Update)

`POST` /policy/targets

Policy for a specific userpartiallyRegister or modify.

Full URL Example

POST http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets

info

Core Action — Partial Update

requestIncluded Policies OnlyIt will be added or updated.
Previously registered**Maintain other policies as they are without touching them.**It works.
already existspolicyIdIf you send it, the value/period of the corresponding policy will beOverwrite with new valueIt works.

Action Example

Current state: Policies A, B, C are registered

POST request: Pass C (new value), D to policyList

Result: Maintain A, B + Update C + Add new D

Request Body

field	type	Essential	Explanation
`targetId`	`String`	O	Policy Target User ID
`manager_id`	`String`	X	Policy Change Requester ID (for history identification, optional)
`updateReason`	`String`	X	Change Reason (For History Management)
`policyList`	`Array`	O	List of Policies to be Updated
`policyList[].policyId`	`String`	O	Policy Identifier (e.g:`SD_DOC_OP_MODE`)
`policyList[].policyValue`	`String`or`Integer`	O	Policy value to set
`policyList[].startTimestamp`	`Long` (int64)	X	Start time of application (epoch ms). If omitted, applies immediately.
`policyList[].endTimestamp`	`Long` (int64)	X	End time (epoch ms). If omitted, indefinite.

Content-Type Required Conditions

POST /policy/targetsmust be requested under the header below.

Content-Type: application/json

text/plainError response when called with:

{
  "code": 4000,
  "codeMessage": "INVALID_REQUEST"
}

curl example

Switching Off the Decontamination Mode (Setting Duration):

curl -X POST   "http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets"   -H "Content-Type: application/json"   -d '{
    "targetId": "user001",
    "manager_id": "portal-admin-01",
    "updateReason": "무해화 모드 OFF 전환 (기간 설정)",
    "policyList": [
      {
        "policyId": "SD_DOC_OP_MODE",
        "policyValue": 0,
        "startTimestamp": 1761523200000,
        "endTimestamp": 1762128000000
      }
    ]
  }'

Deactivation Function Record Mode Switch:

curl -X POST   "http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets"   -H "Content-Type: application/json"   -d '{
    "targetId": "user001",
    "manager_id": "portal-admin-01",
    "updateReason": "무해화 기능 기록 모드 전환 (모니터링)",
    "policyList": [
      {
        "policyId": "SD_DOC_OP_MODE",
        "policyValue": 2
      }
    ]
  }'

Unsupported Extension Record Mode Switch:

curl -X POST   "http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets"   -H "Content-Type: application/json"   -d '{
    "targetId": "user001",
    "manager_id": "portal-admin-01",
    "updateReason": "미지원 확장자 기록 모드 전환 (모니터링)",
    "policyList": [
      {
        "policyId": "SD_NOSUP_EXT_MODE",
        "policyValue": 2
      }
    ]
  }'

Extension Tampering Record Mode Switch:

curl -X POST   "http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets"   -H "Content-Type: application/json"   -d '{
    "targetId": "user001",
    "manager_id": "portal-admin-01",
    "updateReason": "확장자 위변조 기록 모드 전환 (모니터링)",
    "policyList": [
      {
        "policyId": "SD_EXT_MODE",
        "policyValue": 2
      }
    ]
  }'

Switching to Decontamination Error Log Mode:

curl -X POST   "http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets"   -H "Content-Type: application/json"   -d '{
    "targetId": "user001",
    "manager_id": "portal-admin-01",
    "updateReason": "무해화 오류 기록 모드 전환 (모니터링)",
    "policyList": [
      {
        "policyId": "SD_EXCEPTION_BYPASS",
        "policyValue": 2
      }
    ]
  }'

Update on Blocking Exceptions for Unsupported File Extensions:

curl -X POST   "http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets"   -H "Content-Type: application/json"   -d '{
    "targetId": "user001",
    "manager_id": "portal-admin-01",
    "updateReason": "미지원 확장자 예외 목록 갱신",
    "policyList": [
      {
        "policyId": "CQMS_NOSUP_EXCEPT_EXT",
        "policyValue": "log;tmp;"
      }
    ]
  }'

Update on Extension Spoofing Prevention Exception Settings:

curl -X POST   "http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets"   -H "Content-Type: application/json"   -d '{
    "targetId": "user001",
    "manager_id": "portal-admin-01",
    "updateReason": "확장자 위변조 예외 목록 갱신",
    "policyList": [
      {
        "policyId": "SD_EXCEPT_EXT",
        "policyValue": "docx;png;pptx;"
      }
    ]
  }'

Simultaneous application of multiple recording modes:

curl -X POST   "http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets"   -H "Content-Type: application/json"   -d '{
    "targetId": "user001",
    "manager_id": "portal-admin-01",
    "updateReason": "전체 기록 모드 전환 (모니터링)",
    "policyList": [
      { "policyId": "SD_DOC_OP_MODE",       "policyValue": 2 },
      { "policyId": "SD_NOSUP_EXT_MODE",    "policyValue": 2 },
      { "policyId": "SD_EXT_MODE",          "policyValue": 2 },
      { "policyId": "SD_EXCEPTION_BYPASS",  "policyValue": 2 },
      { "policyId": "CQMS_NOSUP_EXCEPT_EXT","policyValue": "log;tmp;" },
      { "policyId": "SD_EXCEPT_EXT",        "policyValue": "docx;png;pptx;" }
    ]
  }'

Response — `200 OK`

{
  "code": 0,
  "codeMessage": "SUCCESS"
}

Error Responses

situation	code	codeMessage
`targetId`does not exist	`4404`	`VALUE_NOT_FOUND`
`policyId`does not exist	`4404`	`VALUE_NOT_FOUND`
`endTimestamp`a`startTimestamp`below	`4000`	`INVALID_REQUEST`
`Content-Type`This is not JSON (`text/plain`etc.)	`4000`	`INVALID_REQUEST`

4. Policy Deletion

`DELETE` /policy/targets

Individual policies applied to specific usersOptionally deselectdoes.
The released policy is automatically applied according to the policy priority chain as **higher policies (affiliated group policies or enterprise defaults)**.

Full URL Example

DELETE http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets

Request Body

field	type	Essential	Explanation
`targetId`	`String`	O	Policy Target User ID
`policyList`	`Array`	O	List of policies to be released
`policyList[].policyId`	`String`	O	Policy Identifier

Content-Type Required Conditions

DELETE /policy/targetsPlease be sure to use the header below as there is a request body.

Content-Type: application/json

curl example

curl -X DELETE   "http://{serverIp}:{serverPort}/WebConsoleApi/policy/targets"   -H "Content-Type: application/json"   -d '{
    "targetId": "user001",
    "policyList": [
      { "policyId": "SD_DOC_OP_MODE" },
      { "policyId": "SD_DOC_LIMIT_SIZE" }
    ]
  }'

Response — `200 OK`

{
  "code": 0,
  "codeMessage": "SUCCESS"
}

5. Integration Flow Summary

You can link in the following order.

step	Method	URI	Explanation
1	`GET`	`/policy/targets/merged/preview/{userId}`	Check the list of all currently applied policies
2	`POST`	`/policy/targets`	Request only the policies to be changed (the rest will be maintained automatically)
3	`DELETE`	`/policy/targets`	Request only the policy to be released (restore to the parent policy)
4	`GET`	`/policy/targets/merged/preview/{userId}`	Reconfirm Status After Change

info

Reference when linking

Step 1of the response retrieved frompolicyIdUse the values as they are to modify/delete in steps 2-3.
Step 2 POSTSince this is a partial update, you only need to send the policies that need to be changed. There is no need to send the entire thing.
All changes are automatically logged, allowing you to restore to a previous state if needed.
When making POST/DELETE calls, it is essential toContent-Type: application/jsonSpecify.

Document Information​

Environment Setup (Required)​

Customer Preparation Requirements​

How to Set Up SOFTCAMP Engineer​

IP Allowlist Settings​

Base URL​

API Resource Map​

1. Common Rules​

1.1 Response Structure​

1.2 Response Code Definition​

1.3 Timestamp Rules​

1.4 Policy Priorities​

1.5 Override Information​

1.6 Request Body Format (Content-Type) Rules​

2. Policy Integration Inquiry​

GET /policy/targets/merged/preview/{targetId}​

Path Parameters​

Response Field​

curl example​

Response Example — 200 OK​

3. Policy Registration/Modification (Partial Update)​

POST /policy/targets​

Action Example​

Request Body​

Content-Type Required Conditions​

curl example​

Response — 200 OK​

Error Responses​

4. Policy Deletion​

DELETE /policy/targets​

Request Body​

Content-Type Required Conditions​

curl example​

Response — 200 OK​

5. Integration Flow Summary​

Document Information

Environment Setup (Required)

Customer Preparation Requirements

How to Set Up SOFTCAMP Engineer

IP Allowlist Settings

Base URL

API Resource Map

1. Common Rules

1.1 Response Structure

1.2 Response Code Definition

1.3 Timestamp Rules

1.4 Policy Priorities

1.5 Override Information

1.6 Request Body Format (Content-Type) Rules

2. Policy Integration Inquiry

`GET` /policy/targets/merged/preview/{targetId}

Path Parameters

Response Field

curl example

Response Example — `200 OK`

3. Policy Registration/Modification (Partial Update)

`POST` /policy/targets

Action Example

Request Body

Content-Type Required Conditions

curl example

Response — `200 OK`

Error Responses

4. Policy Deletion

`DELETE` /policy/targets

Request Body

Content-Type Required Conditions

curl example

Response — `200 OK`

5. Integration Flow Summary